Block magnet 80 x 20 x 4 mm, holds approx. 18 kg

Description

Block magnets with two countersunk holes. They can be fastened with countersunk screws. They are only 4 mm thick and therefore very inconspicuous when used to hang up signs, tools, etc. Especially well-suited for carpentry, kitchen installations, exhibition stand construction, shopfitting, signage technology, etc. We also carry round Neodymium pot magnets with countersunk hole screw-on.

Please note: Neodymium magnets are brittle and can break under excessive application of force. Therefore, we recommend a maximum tightening torque of 2 Nm when fastening this magnet.

The following screws fit into the hole of these magnets, for example:

• Slotted countersunk wood screws: DIN 97 (3,5 mm)
• Cross recessed countersunk flat head screws (machine screw): ISO 7046-2 M3 (3 mm)
• Hexalobular socket countersunk flat head screws (machine screw): ISO 14581 M3 (3 mm)
• Hexagon socket countersunk flat head screws (machine screw): ISO 10642 M3 (3 mm)

Neodymium magnets are perfect for use in dry indoor areas.