• Customer service in 3 languages
  • More than 240 000 orders per year
The product was added to your shopping cart.
Go to shopping cart

Neodymium magnet system Ø 43 mm black rubber-coated with threaded stud, holds approx. 10 kg

thread M4


Item number GTNG-43
Strength approx. 10 kg
Displacement force approx. 3 kg
Unit of Sale 1 piece
Price and rebate
1 pc. 5,59 EUR ea.
from 3 pcs. 4,88 EUR ea.
from 10 pcs. 4,25 EUR ea.
from 20 pcs. 3,95 EUR ea.
from 40 pcs. 3,68 EUR ea.
Ask for a rebate from 160 pcs.
incl. VAT plus shipping

5,59 EUR

incl. VAT plus shipping

currently not deliverable

...

Receive e-mail when item available again

For pre-orders, please contact Customer Service by e-mail or phone.

Description

This rubberised magnet system with threaded stud works great on delicate surfaces. The rubber coating not only protects against scratches but also increases the weight capacity in shear direction and makes it slip-resistant. The rubber protects the magnet from occasional moisture and splashes. However, with permanent outdoor use, rust may form. Our ferrite pot magnets, on the other hand, are rust-proof.

Compared to standard pot magnets without a rubber coating, this rubberised magnet system is thinner and more discreet. There is a steel plate under the rubber coating with 6 embedded magnets. They are arranged alternately with north and south pole facing up. As a result, you will be able to combine these magnet systems with each other. But please be careful, because once two of these magnet systems are fully joined, it will be very difficult to separate them again.

Please note:
If you want to reposition the magnet system, please do not attempt to remove it by dragging it along the mounting surface. This will damage the rubber coating. Instead, remove the magnet by tilting it with the help of a plastic handle.

The full adhesive force is achieved when the ferromagnetic counterpart is smooth and of sufficient thickness and when the magnet system makes direct and complete flush contact. Magnet systems already start to lose part of their adhesive force at a small distance from the ferromagnetic surface. This characteristic is more pronounced in magnet systems than in other ferrite and neodymium magnets. You can find additional fascinating information on our FAQ page about magnet system characteristics.

Technical data

Article ID GTNG-43
EAN 7640155439893
Material NdFeB
Strength approx. 10 kg (approx. 98,1 N)
Displacement force approx. 3 kg (approx. 29,4 N )
Product version With threaded stud
Colour Black
Diameter D 43 mm
Pot height H1 6 mm
Total height H2 12 mm
Thread size M4
Tolerance +/- 0,5 mm
Covering Rubber (TPV)
Magnetisation N38
Steel Q235 (China)
Max. working temperature 80°C
Weight 30 g
PDF data sheet

The structure of magnet systems


In magnet systems, one or several magnets are mounted on a steel plate with alternating poles. This concentrates the adhesive force of the magnets on one side of the system which, in turn, has a positive effect on the adhesive force. The steel plate with the magnets is encased in rubber. For more information, please refer to our FAQ page on the characteristics of magnet systems.

Recommended accessories for this product

Load...
metal discs with countersunk hole Ø 42 mm, as a counterpart to magnets, these are not magnets!
5 pcs. 0,74 EUR ea.*
from 15 pcs. 0,67 EUR ea.*
from 40 pcs. 0,62 EUR ea.*
from 80 pcs. 0,58 EUR ea.*
Ask for a rebate from 4 000 pcs.
 
metal discs with countersunk hole Ø 50 mm, as a counterpart to magnets, these are not magnets!
5 pcs. 0,80 EUR ea.*
from 15 pcs. 0,72 EUR ea.*
from 40 pcs. 0,66 EUR ea.*
from 80 pcs. 0,63 EUR ea.*
Ask for a rebate from 5 500 pcs.
Available: 6 090 pcs.
made of stainless steel A2, 100 pieces/UoS
1 UoS 6,34 EUR/UoS*
Available: 154 UoS