Glue-in pot magnets

These neodymium pot magnets are glued into indentations when screwing is not possible. They have a higher adhesive force than countersunk pot magnets of the same size because the contact surface is larger. Please note: The magnets are not self-adhesive; a suitable adhesive is linked under accessories.

Filter

Reset filter

Diameter mm

Strength kg

9 items

Display:

Load...

FGN-10
Glue-in pot magnet, Ø 10 mm, strength approx. 2,2 kg

	5 pcs.	1,69 EUR ea.*
from	15 pcs.	1,47 EUR ea.*
from	40 pcs.	1,30 EUR ea.*
from	80 pcs.	1,20 EUR ea.*
Ask for a rebate from 350 pcs.

Available: 8 285 pcs.

FGN-13
Glue-in pot magnet, Ø 13 mm, strength approx. 3,2 kg

	5 pcs.	1,84 EUR ea.*
from	15 pcs.	1,61 EUR ea.*
from	40 pcs.	1,43 EUR ea.*
from	80 pcs.	1,33 EUR ea.*
Ask for a rebate from 350 pcs.

Available: 4 705 pcs.

FGN-16
Glue-in pot magnet, Ø 16 mm, strength approx. 5,5 kg

	5 pcs.	2,01 EUR ea.*
from	15 pcs.	1,76 EUR ea.*
from	40 pcs.	1,57 EUR ea.*
from	80 pcs.	1,46 EUR ea.*
Ask for a rebate from 350 pcs.

Available: 3 535 pcs.

FGN-20
Glue-in pot magnet, Ø 20 mm, strength approx. 9 kg

	1 pc.	3,55 EUR ea.*
from	3 pcs.	3,11 EUR ea.*
from	10 pcs.	2,71 EUR ea.*
from	20 pcs.	2,52 EUR ea.*
from	40 pcs.	2,35 EUR ea.*
Ask for a rebate from 280 pcs.

Available: 3 734 pcs.

FGN-25
Glue-in pot magnet, Ø 25 mm, strength approx. 22 kg

	1 pc.	3,82 EUR ea.*
from	3 pcs.	3,35 EUR ea.*
from	10 pcs.	2,93 EUR ea.*
from	20 pcs.	2,73 EUR ea.*
from	40 pcs.	2,55 EUR ea.*
Ask for a rebate from 260 pcs.

Available: 2 897 pcs.

FGN-32
Glue-in pot magnet, Ø 32 mm, strength approx. 34 kg

	1 pc.	4,70 EUR ea.*
from	3 pcs.	4,15 EUR ea.*
from	10 pcs.	3,65 EUR ea.*
from	20 pcs.	3,41 EUR ea.*
from	40 pcs.	3,20 EUR ea.*
Ask for a rebate from 260 pcs.

Available: 196 pcs.

FGN-42
Glue-in pot magnet, Ø 42 mm, strength approx. 68 kg

	1 pc.	7,87 EUR ea.*
from	3 pcs.	7,01 EUR ea.*
from	10 pcs.	6,24 EUR ea.*
from	20 pcs.	5,87 EUR ea.*
from	40 pcs.	5,54 EUR ea.*
Ask for a rebate from 260 pcs.

Available: 1 702 pcs.

FGN-48
Glue-in pot magnet, Ø 48 mm, strength approx. 85 kg

	1 pc.	14,39 EUR ea.*
from	3 pcs.	12,93 EUR ea.*
from	10 pcs.	11,63 EUR ea.*
from	20 pcs.	10,99 EUR ea.*
from	40 pcs.	10,43 EUR ea.*
Ask for a rebate from 260 pcs.

Available: 577 pcs.

FGN-60
Glue-in pot magnet, Ø 60 mm, strength approx. 130 kg

	1 pc.	24,53 EUR ea.*
from	3 pcs.	22,19 EUR ea.*
from	10 pcs.	20,09 EUR ea.*
from	20 pcs.	19,08 EUR ea.*
from	40 pcs.	18,18 EUR ea.*
Ask for a rebate from 260 pcs.

Available: 278 pcs.

Features of pot magnets

Principle: The strong neodymium magnets are embedded in a steel pot. The steel pot increases the adhesive force of the magnet on direct contact with a thick iron surface. If there is no direct contact with the counterpart, or if the steel plate is thin, painted or rough, you won’t be able to put as much strain on it.

Shear force: The indicated adhesive force was measured perpendicular to the surface to which the magnet should stick. It takes a lot less strength to move the magnet sideways. Therefore, you won’t be able to put as much strain on a pot magnet if you use it on a wall as opposed to using it on the ceiling.

Rust: These magnets are not rust-proof and therefore intended for dry indoor use.

All further information regarding these products can be found in our FAQ about pot magnets.