Neodymium channel magnet 20 x 20 x 4 mm, holds approx. 10 kg

with countersunk hole, in U-shaped steel profile

Attribute name	Attribute value
Item number	CSR-20-20-04-N
Strength	approx. 10 kg
Displacement force	approx. 2,1 kg
Unit of Sale	1 piece

Description

This screw-on channel magnet is a square flat countersunk block magnet, embedded in a U-shaped steel profile. With direct contact, the steel significantly strengthens the magnet's adhesive force and at the same time protects it from blows. Its minimal thickness of only 4 mm allows for inconspicuous magnetic mounting of signs, tools and more. It is especially suitable for carpentry, kitchen installations, exhibition stand construction, shopfitting, signage technology, etc.

Please note: Not all holding surfaces are level, which is why magnets need a little slack. This allows them to optimally align with the ferromagnetic object and extend the highest adhesive force. That is why we recommend fastening these magnets by hand.

The following screws fit into the hole of these magnets, for example:

Slotted countersunk wood screw: DIN 97 (3,5 mm)
Cross recessed countersunk flat head screws (machine screw): ISO 7046-2 M3 (3 mm)
Hexalobular socket countersunk flat head screws (machine screw): ISO 14581 M3 (3 mm)
Hexagon socket countersunk flat head screws (machine screw): ISO 10642 M3 (3 mm)

Please note: The full adhesive force is achieved when the ferromagnetic counterpart is smooth and of sufficient thickness and when the pot magnet makes direct and full flush contact. Pot magnets already lose much of their adhesive force at a distance of only half a millimetre to the ferromagnetic surface. This characteristic is more pronounced in pot magnets than in other ferrite and neodymium magnets. You can find additional fascinating information on our FAQ page about pot magnet features.

Technical data

Attribute name	Attribute value
Article ID	CSR-20-20-04-N
EAN	7640155439497
Material	NdFeB
Strength	approx. 10 kg (approx. 98,1 N)
Displacement force	approx. 2,1 kg (approx. 20,4 N)
Colour	Silver-coloured
Shape	Block
Design	With countersunk hole
Length S1	20 mm
Length S2	20 mm
Height H	4 mm
Hole d1	4,5 mm
Countersink d2	9,46 mm
Countersink t	3 mm
Tolerance	+/- 0,1 mm
Coating	Nickel-coated (Ni-Cu-Ni)
Magnetisation	N38
Visible side of the magnet	North pole
Max. working temperature	80 °C (possibly lower)
Max. tightening torque	2 Nm
Steel	Q235 (China)
Weight	11 g
PDF data sheet

Product Safety Information

Manufacturer: Webcraft GmbH / supermagnete, Industriepark 206, 78244 Gottmadingen, Germany, support@supermagnete.com

Magnets are not toys. Please make sure to carefully read our safety instructions.

Additional features and tips

The structure of pot magnets

Pot magnets have a neodymium or ferrite magnet built into a steel pot. When it comes into direct contact with a surface, its force will be focused on the holding surface as a result. This increases the adhesive force of the magnet. For more information, please refer to our FAQ page on the characteristics of pot magnets.