• Over 46 million magnets in stock
  • Around 250 000 orders per year
The product was added to your shopping cart.
Go to shopping cart

Thickness gage for instruments

Measures continuously the thickness of non-magnetic objects
Author: Guido Brancalion, Liuteria Marconi snc, Cureggio, Italy, [email protected]
Online since: 14/03/2012, Number of visits: 226802
0
Guido Brancalion developed a device that measures the thickness of non-magnetic objects. This application is especially helpful for instrument makers so they can check if the wood of a violin or guitar is equally thick in all places. With this device you don't need to take the instrument apart.

Application:

A disc magnet S-06-06-N is placed on the inside of the instrument.
Then, wrap the pot magnet GTN-16 in a cloth and move it along the outside of the instrument until the two magnets attract each other.
Now, replace the pot magnet with the metal sensor. The Hall sensor measures the magnetic flux density in this spot and calculates the distance between the sensor and the disc magnet on the inside.
The device measures distances of up to 5 mm with a +/- 0,03 mm deviation. At a larger distance the magnet on the inside won't adhere anymore. For more detailed information refer to the flyer and the technical data (see below).
Even the thickness of glass can be measured with this device.
Even the thickness of glass can be measured with this device.

The entire content of this site is protected by copyright.
Copying the content or using it elsewhere is not permitted without explicit approval.