• Over 46 million magnets in stock
  • Around 250 000 orders per year
The product was added to your shopping cart.
Go to shopping cart

Hanging up tools

This sturdy hanging construction was created by a "magnetophile" cabinet maker
Author: Bettina Schläpfer, Hinwil, Switzerland
Online since: 04/01/2008, Number of visits: 493818
0
Table of Contents

Tool wall with magnets

I had the opportunity to arrange my work bench in the new carpenter's workshop. Of course, this includes a tool wall.
I knew that I wasn't going to use common tool holders. First of all, I am a magnetophile and second of all, I am not a fan of common tool holders in which the tools get stuck and are hard to get out of. Therefore, I decided on the strong disc magnets from supermagnete.dk.
I randomly ordered some stronger and less strong magnets and started drilling. Initially, I wanted the magnets to be invisible and attached to the backside, but the bevelled-edge chisels and screwdrivers wouldn't stick. Only the ploughs would work that way. The other tools I hung up with disc magnets glued into drill holes in the front.
Magnets used for bevelled-edge chisels, screwdrivers and pliers: Discs 10 x 5 mm and Discs 12 x 6 mm
You need a good adhesive so the magnets won't come off, for example the UHU MAX REPAIR.
But I didn't magnetise everything: I hung up hammers and angle brackets on nails. That works well. A magnetic hammer wouldn't be all that practical. But I do like that the screw drivers are magnetic :-)
I love this solution. Removing tools from the board is convenient and putting them back is just as easy. I like them more every day!

Additions and other possibilities

Tools on a steel shelf

Addition by Mr. Hoppe from Germany: I found a great way to hang up individual tools: I glued small block magnets Q-10-05-03-N to a metal shelf in the basement. They hold combination pliers with about 200 g weight without problems.

Tools on the ceiling

Addition by Mr. Prowaznik from Germany: Since I didn't have any room left on my workshop wall, I hung up a hacksaw on the ceiling. I just had to screw two pot magnets CSN-13 to the ceiling, which now hold the saw without problems.

Screw drivers on lighting

Due to lack of space, I simply attached my screwdrivers to the bottom side of a fluorescent tube.
I glued a double-sided adhesive tape on the lamp, pressed disc magnets S-05-02-N52N on it, and the tips of the screwdrivers adhere to them perfectly.
You can also attach your tool to these screw-on magnetic bars:
These and other helpful magnetic products can be found in the shop category "workshop".

The entire content of this site is protected by copyright.
Copying the content or using it elsewhere is not permitted without explicit approval.