Friendship rings
The perfect gag for couples - even the rings can't get close enough
Online since: 08/07/2008,
Number of visits: 321848
1
Hi supermagenete, with 4 block magnets Q-CDM48-G
and a little bit of coconut shell, I made two rings that gravitate towards each other by their "seals".
Rings for a couple, so to speak :-)
The top side of the seals is laser-engraved.
The initials "CD" are the initials of the first names and the sign in the back means the same.
The signs are slightly modified based on Tolkien's elf language.
For the interested reader: The left sign means "ka" and the right sign means "di".
The spelling complies with the Sindarin mode; the signs are extended sings, as they appear in the ring inscription.
The magnets were glued into the seals.
Thereafter, the seals were glued onto the rings.
I used simple wood glue.
In my first try I used one magnet per seal, but the attractive force was not strong enough.
Then I used two magnets per seal, and now you can clearly feel the attractive force when the hands come close to each other (from 2 - 3 cm).
The entire content of this site is protected by copyright.
Copying the content or using it elsewhere is not permitted without explicit approval.
Copying the content or using it elsewhere is not permitted without explicit approval.