• Customer service in 3 languages
  • Over 46 million magnets in stock
The product was added to your shopping cart.
Go to shopping cart

Breakdance needle

Magnets as hip hop dancers in your own bedroom
Author: Yves Goormaghtigh, Enghien, Belgium, [email protected]
Online since: 28/04/2009, Number of visits: 300999
0
The goal for my experiment was to keep the parts in motion as long as possible. This was accomplished by minimising the friction - the needles have a tiny contact surface.
This "breakdance needle" makes me happy as a child!
The big cube magnet (see below) is hanging from a metal lamp shade. Other metal objects of a certain height will work just as fine.
The goal for my experiment was to keep the parts in motion as long as possible. This was accomplished by minimising the friction - the needles have a tiny contact surface.
This "breakdance needle" makes me happy as a child!
The big cube magnet (see below) is hanging from a metal lamp shade. Other metal objects of a certain height will work just as fine.
A W-05-N and a K-08-C is attached to the needle below.
Place this "spinning top" or "breakdancer" on a smooth surface underneath the metal object. In my case it is a glass table top, but you can also use a flat plate.
The "spinning top" rotates really fast and almost frictionless on the smooth surface. The sphere is at the very bottom.
Here you can see the construction of the Y part in detail. I used 8 W-05-N and 11 K-08-C.
The cube at the end is then connected to a needle.
Note from the supermagnete team: The cube on this picture is not one of ours. For this application it looks a little over the top - a W-12-N cube magnet from our shop would do the trick just as well. If you want a larger magnet for a visual effect, you can also use THE GIANT.

The entire content of this site is protected by copyright.
Copying the content or using it elsewhere is not permitted without explicit approval.