Magnetic cable holders

These magnetic cable holders allow you to attach cables, pipes, hoses etc., to ferromagnetic surfaces in a way that is flexible and without drilling. If needed, you can remove or reposition the magnetic cable holders at any time. Thanks to the rubber coating, these cable holders will not leave any scratches on delicate surfaces.

4 items

Display:

CMN-18

cable holder magnetic Ø 18 mm, holds approx. 2,5 kg, rubber-coated magnet system for cable ties

	1 pc.	4,80 EUR ea.*
from	3 pcs.	4,38 EUR ea.*
from	10 pcs.	4,01 EUR ea.*
from	20 pcs.	3,82 EUR ea.*
from	40 pcs.	3,67 EUR ea.*
Ask for a rebate from 1 300 pcs.

Available: 21 207 pcs.

CMN-22

cable holder magnetic Ø 22 mm, holds approx. 3,9 kg, rubber-coated magnet system for cable ties

	1 pc.	5,15 EUR ea.*
from	3 pcs.	4,66 EUR ea.*
from	10 pcs.	4,24 EUR ea.*
from	20 pcs.	4,03 EUR ea.*
from	40 pcs.	3,86 EUR ea.*
Ask for a rebate from 900 pcs.

Available: 24 001 pcs.

CMN-31

cable holder magnetic Ø 31 mm, holds approx. 9,1 kg, rubber-coated magnet system for cable ties

	1 pc.	6,00 EUR ea.*
from	3 pcs.	5,40 EUR ea.*
from	10 pcs.	4,86 EUR ea.*
from	20 pcs.	4,60 EUR ea.*
from	40 pcs.	4,37 EUR ea.*
Ask for a rebate from 550 pcs.

Receive e-mail when item available again

CMN-43

cable holder magnetic Ø 43 mm, holds approx. 10 kg, rubber-coated magnet system for cable ties

	1 pc.	7,27 EUR ea.*
from	3 pcs.	6,58 EUR ea.*
from	10 pcs.	5,96 EUR ea.*
from	20 pcs.	5,66 EUR ea.*
from	40 pcs.	5,39 EUR ea.*
Ask for a rebate from 600 pcs.

Available: 15 685 pcs.

Characteristics of rubberised magnet systems

Principle: A magnet system consists of several magnets (in the case of small magnet systems only one), which are attached to a steel plate. Compared to pot magnets, magnet systems have less height and can be used more discreetly.

Displacement force: The indicated adhesive force was measured perpendicular to the surface to which the magnet should stick. It takes a lot less strength to move the magnet system sideways. Therefore, you won’t be able to put as much strain on a magnet system if you use it on a wall as opposed to using it on the ceiling.

Rust: The rubber coating somewhat protects magnet systems from moisture. With long-term outdoor use, however, rust will form and cause the neodymium magnets to lose their adhesive force after a while.

You can find additional information on magnet systems on our FAQ page about magnet system characteristics.